skip to Main Content

Sizes from 150mm to 1600mm
Up to 6 blow vens


This machine is designed to blow air onto the upper and the lower sides of the tiles at high speed and pressure. The upper side of the input material is first washed with clean water to remove any residues from previous processes, then it gets cleared by a cross rubber strip. Subsequently, it moves forward on a roller conveyor equipped with cross top/bottom blow vents.

Suitable for all formats

The use of multiple blow vents with variable setup allows for the optimization of machining conditions for many different sizes.

Blower/suction drum replacement kit with blow-only turbine.


Total drying

Single pump 18.5 kW – Double pump 22 kW

The transversal brushes allow the removal of all traces of moisture even from the corners of the tiles.

Download the corresponding catalogue section in PDF

Back To Top